This kit contains
1. Infra Red (IR) Remote Receiver.
2. IR Remote Control.
3. Receiver power supply
4. US mains cable
Installation Summary to suit Rowe AMI CD51
With a flat head screw driver, remove the existing red and black volume wires.
Place the existing volume wires neatly in the harness cable clamp.
Mount the remote receiver in a suitable location and insert the remote receiver cable into the cable hole where indicated.
Use a flat head screw driver to connect the Volume (red), Common (black) and Cancel (white) wires to the screw terminals as shown above.
1. Fit the power supply into the amplifier section as shown.
2. Run the DC cable from the power supply to the power socket on the IR receiver cable.
3. Connect the power plug to the remote receivers power socket. Use cable ties to secure the DC cable along the existing harness. Bundle any excess cable.
Connect the mains cable to the service port of the Jukeboxes Power supply.
The complete Installation manual can be found here